Helping you plan your home improvement project, from start to finish

Cost of Veneer Stone Pavers

Get free estimates from local Paving contractors.

Or, call us to get free estimates (833) 915-1318.

National Paving Costs

$8 per sq. ft. Minimum Cost
$15.50 per sq. ft. Maximum Cost

Real Quoted Projects From Paving Contractors

Concrete & Masonry

Concrete & Masonry

Concrete Driveways & Floors - Install, Single family house or condo

  • 2310 projects like this
  • Most recent: 13 hours ago
Concrete & Masonry

Concrete & Masonry

Concrete Patios, Walkways & Steps - Install, 1 - 2 weeks, Single family house or condo

  • 1167 projects like this
  • Most recent: 14 hours ago

Cost of Veneer Stone Pavers

There are a great many factors that contribute to the cost of veneer stone pavers. For instance, it's important to understand is that veneer stone pavers aren't manufactured at one base level of quality. Just like any other material, there are varying levels of quality to look out for. It's also important to know the exact size and space of the project. As the price of veneer stone pavers is typically calculated by square feet, this is an essential bit of information when contemplating buying veneer stone pavers. See all the info. below. 

The Costs

  • Minimum cost of veneer stone pavers: $8 per square foot

  • Maximum cost of veneer stone pavers: $15.50 per square foot

Cost of Veneer Stone Pavers

The overall cost of the pavers all boils down to the intent of the project. If it is a lengthy project in which a contractor will be involved, then the costs will be higher. The process of laying down and installing the material is one that could require a good deal of hours to complete. If looking to hire a contractor, an inspection of the general work site would help ascertain the time and materials needed. A project could be completed in as little as a few days or as long as a week or two. As with any home improvement project, however, problems could arise during completion of the installation.


There are not many materials needed for the general construction of a project using veneer stone pavers, which definitely helps in keeping the project as organized and on schedule. In regards to the most essential of materials, the veneer stone pavers, as well as the mortar to set them in, is all that is needed. If doing the installation without the use of a contractor, there are a few tools that are necessary to complete the project, including, though not limited to, a brick hammer, trowels and a grout bag, as well as a masonry saw, brush and sponge.

In regards to the mortar, it's also possible, though not highly recommended, to use cement or concrete mix instead of mortar. Mortar is a substance that is used primarily to set the veneer stones in place, similar to how concrete is used. Although it may seem like it when applying the mortar, it's not necessary to use a liberal amount of the material, as it sets easily and will remain durable once applied adequately.

Mortar, cement and concrete mix are materials that are easy to obtain and can be found at any local hardware store. Each substance can be bought in large bags, typically ranging from 30 to 100 pounds, though sometimes more. If buying a basic 50-pound bag, cement will be the most expensive of the three, ranging from $5 to $8 per 50-pound bag. Mortar and concrete will usually run at a price of $3 to $5 per 50-pound bag. If time is an issue, there are rapid-set packages for each of the three materials that will allow the substances to set at a much faster rate. This will cost more as each substance can range from $15 to $25 per 50-pound bag at a local home improvement store.

The rest of the materials mentioned previously can range in cost from anywhere from $135 to $350, with the masonry saw taking up the brunt of the costs. If doing the installation without the use of a contractor, the masonry saw is particularly useful as it allows for the cutting and shaping of the materials on hand.

Advantages to Using Veneer Stone Pavers

There is no limit to the possible colors and quality options to choose from, leaving the ability to have a wide range of choices. It's not a highly expensive material, which makes it perfect for those on a budget. It is not a particularly thick or weighty substance, making it the perfect material to use on projects that need to be done in a speedy manner.

Disadvantages to Using Veneer Stone Pavers

As veneer stone pavers are relatively thin, they are susceptible to damage, such as scraping and pieces breaking off. While this is a negative, stone veneer is easily repairable. Stone veneer pavers are an easy material to improperly install, which can result in a ton of damage and wasted time if its not realized until the completion of the project. This is another reason that it is advisable to use a contractor.

One of the main aspects that can't fully be considered as an advantage or disadvantage is that of the aesthetic. No matter how great veneer stone pavers are, what matters most is the design and aesthetic for the project. If veneer stone pavers can't create the aesthetic that one is looking for, then it's advisable to go in another direction. The good news is that veneer stone pavers are one of the easiest materials to create a wonderful design with.

Get free estimates from local paving contractors

Last updated on Nov 8, 2018

Looking for accurate quotes on your project?

  • Get multiple quotes for any home improvement project
  • See pro's rating, reviews, projects and more
  • 100% free, no obligations
  • Only takes a few minutes

Find pros in your area.